.Sampling Monitoring Equipment
Heron Water Tape
A Tough Economical Water Level Meter Built for Well Drillers
The durability and low
cost of the Water Tape Water Level Meter make it the ideal choice for Well
Drillers.
The Water Tape has a
strong 300ft (100m) measuring tape wound on a tough aluminium reel mounted on
a tubular steel frame. It is easy to use, easy to read and easy to
change.
The Water tape is
designed and built to the same high standards as all other HERON Products.
The Heron Water Tape gives you these features for easy use
Strong polyethylene measuring tape
reinforced with Kevlar. Stainless Steel Conductors.
Full depth rated probe 16mm diameter
stainless steel and Teflon® construction.
Dirt and Waterproof encapsulated electronic
module includes a circuit/battery, test button, visual and audible
signal and sensitivity control.
Easy access 9V battery and draw.
Durable powder coated tubular steel frame with vinyl hand grip, casing hook, probe holder and large ergonomic brake.
FEATURES
Strong 100m tape with 50cm graduations (other lengths available)
Full depth rated 16mm diameter probe.
Tough aluminium reel mounted on tubular steel frame
Buzzer and light indicators
Easy access 9V battery
Excellent value
-----------------------
Solinst 101 Water Level Meter:
The Solinst Model 101 Water Level
Meter has been the groundwater industry standard for years. Now a newly
improved reel has raised the standard again. Solinst has listened to their
customers over the years, and incorporated 15 design improvements including: 
Easy access battery drawer
Enhanced ergonomics
Simple electronics removal
Tape guide/datum included
And a lower price too!
FEATURES:
-Very rugged meter
Operating Principles:
The Model 101 Water Level Meter uses a well designed probe, attached
to a permanently marked polyethylene tape, fitted on a well-balanced reel.
The conductors embedded within the tape each have seven strands of stainless
steel.
The
probe incorporates an insulating gap between electrodes. When contact is made
with water, the circuit is completed, sending a signal back to the reel. This
activates a loud buzzer, and a light.
The
water level is then determined by taking a reading directly from the tape, at
the top of the well casing or borehole. Use of a tape guide gives extra
accuracy and protects the tape.
The high quality storage and winding reel has a convenient carrying handle, a
brake, and a sturdy, stand-alone design. Standard controls include a battery
test button, on/off switch and an internal sensitivity adjustment
Model 101 Probe Options:
All probes are designed to reduce or eliminate problems with cascading
water. The following options are available:
P2 Stainless Steel: with a neoprene strain relief.
0.5" dia. by 7.5" long ( 12.7 mm x 190 mm).
P4 Environmental: stainless steel.
Design permits sub mergence below water. Gives improved operation in
both cascading water and low conductivity water. Negligible water
displacement ensures higher accuracy. The probe pulls apart for easy
cleaning, and decontamination and to accept C4 and T4 Sleeves.- 15.9 mm x 220
mm.
New Mini 101 Water Level
Meter
The
Mini 101 Water Level Meter is ideal for use in narrow diameter applications
as small as 3/8" (10 mm).
The narrow 1/4" (6 mm) tape is mounted on a convenient small reel that
is light weight and fits easily into a backpack. The accurate, flat white
tape is marked each 1/100 ft. or each mm.
The Mini 101 is available in 10m and 20m lengths with a choice of the
1/4" (6mm) P1 probe, or the heavier 3/8" (10mm) P2 probe.
------------------------
Solinst 122 Interface Meter
Solinst Oil/Water Interface Meters give accurate
measurements of product level and thickness in wells and tanks. The unit
gives quick and easy determination of both floating non-conductive liquids
(L.N.A.P.L.s) and sinking non-conductive liquids (D.N.A.P.L.s). The state-of-the-art
electronics includes automatic circuitry testing every time the ‘On’ button
is used: extended battery life; clear signals; and high accuracy. 
Tape guide & carrying bag
The tape guide/datum allows repeatability accurate measurements, even with
different personnel and it also protects the tape from damage on sharp edges
of well casing. A convenient carrying bag with a shoulder strap and a
tape guide are provided.
Tape
The easy-to-read, flat-tape cable uses stranded stainless steel conductors embedded
within polyethylene. The conductors provide strength and prevent cable
stretch. The smooth surface of the tape is easy to clean and
decontaminate. Markings are permanently heat-embossed onto the cable.
DNAPLs
The Model 122 Interface meter measures sinking product directly, with no
correction needed. The factory-sealed probe is pressure proof and tape
lengths are available in a range of lengths up to 500m.
High Quality Design
The state-of-the-art electronics includes automatic circuitry testing with
the ‘On’ button, gives extended battery life, clear signals and high
accuracy.
Infrared refraction is used to detect liquids and conductivity to distinguish
water. Both optical and electronic sensors are precisely at the zero point. A
steady light and tone indicate product, and water is indicated by
intermittent signals.
The
factory sealed probe does not need to be accessed by the user, and the
sensors are protected by a removable PVC shield which allows easy cleaning.
Power is supplied by 2 standard 9V batteries located in easy access drawers
in the reel.
A choice of two probes:
Narrow Diameter P1 Probe
The
16mm diameter stainless steel probe allows easy access through tight spaces
and into narrow wells. The beam is emitted from within a cone-shaped tip made
from a rigid polyurethane material. The tip is protected by a removable PVC
shield, which allows easy cleaning.
This probe is excellent for the vast majority of product monitoring
situations.
New Improved wide P2 Probe
Solinst also offer an improved version of their popular wider probe as an optional P2 probe - 38.1mm stainless steel with Teflon filled Delrin tip. The inferred emitter and detector are protected by glass, which is resistant to all chemicals. The new P2 probe retains all the great features of the previous model but the battery and switch now conveniently located on the reel. The heavier weight of this probe makes it more suitable for greater depths.
FEATURES:
-Designed for rugged field use
-Free standing reel with carrying handle.
-Mounted on the sturdy Solinst flat tape
-Certified Intrinsically safe to USA Standards
-16mm diameter probe for small diameter wells
-Clear signals
-Easy access batteries, with 120 hours of use
-Easily cleaned
-Lengths from 15 - 500 meters
-Automatic circuitry testing upon start-up
-Accuracy to 1.0 mm
---------------------------
Heron Sm.Oil
The Heron Sm.Oil Interface meter meets the
requirements for a small, low cost, high quality meter for use in shallow
monitoring wells. Why pay for what you do not need? The 60ft or 20m tape
length of the Sm.OIL makes this unit the ideal unit for shallower wells.
The Sm.OIL uses the same technology as the popular HERON H.01L Interface
Meter. The probes are field serviceable and all the electronics are full
encapsulated for durability. Weighing less than two kilograms, it’s also very
portable for the field. The unit is rated intrinsically safe for safe
operation.
FEATURES
Lightweight and compact for extra Portability
About 1/2 the cost of a regular interface
meter!
Certified Intrinsically safe CSA/NRTL Class 1
Gr. A.B.C.D.
Will detect L.N.A.P.L.s and D.N.A.P.Ls
without changing probe.
10 Year Warranty on most components, (excl.
Tape, Carry Bag, Labour & Shipping)
-------------------------------
-----------------------
-----------------
|
|
||
|
bailer |
||
|
What is a bailer : Most bailers consist of some form of tubing with a one-way check valve at the bottom. Water( liquid) in atank or groundwater well fill the bailer when it is lowered into it . On retrieving the bailer , the check valve closes containing a sample of the content of the well or tank .Bailers come in various types ( polyethylene, Teflon, stainless steel, acrylic).lengths( from 30cms to 180 cms ) we supplies both Disposable and reusable bailers. Choose from the extensive range of single check, double check and weighted in narrow, standard and wide diameter bailers. |
||
|
Voss Polyethylene & Teflon® |
Monoflex Polyethylene |
Clear-View PVC, Polyethylene & Teflon® |
|
Voss manufacture a wide range of disposable bailers from standard single check bailers to double check and weighted in various sizes. New Features.
Benefits
|
Monoflex
offers two models a standard single check bailer with free VOC samplers and a
weighted single check bailer also with free VOC samplers.
Benefits
|
The the most economically priced bailers. Includes the original Clear View PVC bailer - a completely clear PVC bailer. Also available, polyethylene and Teflon® bailers. Benefits
|
-----------------------
Eutech Pocket Testers:
The waterproof pH and Conductivity / TDS testers represent the latest
generation of testers. Advanced circuitry provides direct full-scale readout,
while the durable casing is waterproof and provides protection from knocks.
The sensors are user-replaceable - why change over the whole instrument when
you can just swap a sensor? 
Also
available from Eutech:
Non-Waterproof and combined testers for pH, Cond, TDS, ORP & temperature.
Options
:
Carrying pouch
replacement
batteries
replacement sensors
calibration solutions
-----------------------
GA2000 Infrared Gas Analyser
GA2000 is a successor to the ultra-reliable GA94
infra-red gas analyser for routine monitoring of landfill sites. This all new
intrinsically safe analyser has been developed following industry wide consultation
on the future needs of landfill monitoring. This extensive research has
enabled us to produce an analyser with exceptional features – features that
allow GA2000 to out perform GA94. 
Features
Intrinsically
Safe - essential for protecting all personnel who work with explosive
and therefore hazardous Landfill Gas. Rated to EEx ibd IIA T1
Five
Gas Capability - measures CH4 and CO2 by infra-red absorption and O2,
H2S and CO by internal electro-chemical cells.
Records
Peak CH4 - maximum and stabilised CH4 readings are automatically
shown.
Easy
to read display - extra large backlit LCD shows all five gases, peak
CH4, atmospheric and gas pressure / vacuum, temperature, I/D code all at
the same time.
Records
Site Conditions - weather and user-defined comments are easily
stored.
Fast
- navigator keys allow access of all screen options.
On
Site Calibration - rapid calibration checking or adjustment can be
carried out on site using a single gas mixture.
Fast
Battery Charge - it takes only 2 hours to recharge the battery from
flat.
Purge
- the unit is automatically purged with clean air after each reading -
thus extending the life of the integral electro-chemical cells.
Powerful
pump - allows the unit to be used with LFG extraction systems.
Datafield
Compliant - data may be downloaded directly into Datafield software -
where Landfill Gas readings may be archived, graphed, tabulated and
trended.
Accepts
Protocols - the order of data collection and user actions required at
each borehole can be user programmed.
Lifetime
Guarantee Programme - ensures that analyser is maintained in excellent
condition.
Large
Memory - 850 sets of readings can be stored, together with automatic
time & date stamp.
Data
Logging - user may programme logging intervals.
Measures
Gas Temperature - by using optional electronic probe.
Display
of CH4 - is in % gas and % LEL.
Flow
Measurement - will accept Geotechnical Instruments Flow Pod (for low
flows) and anemometer (for high flows).
BENEFITS
Safe: Certified intrinsically safe -
essential for use on landfill sites.
Accurate: Infra-red technology ensures
consistent reading accuracy.
Reliable: Field proven technology in a
robust, weatherproof enclosure.
Efficient: Simultaneous measurement and
display of all parameters on one screen.
Secure: Integrated data management software ensures safe transfer of readings to a PC for analysis.
------------------------------
Infrared Gas Analyser:
The GA94 has been confirmed by clients as the
most reliable, rugged and handy landfill gas monitor.
Operation:
An integral pump draws gas through an in-line water trap and a replaceable
filter into a sample chamber.
An infrared beam is projected, via sapphire windows, through the gas sample.
The beam is sensed by three detectors: one for Methane, one for Carbon
Dioxide and one for compensation. A microprocessor calculates the amount of
infrared light absorbed at different wavelengths and determines the various
gas concentration levels present. Readings are shown on a liquid crystal
display as a percentage of gas concentration by volume. Methane
concentrations may also be expressed in terms of a percentage of the Lower
Explosive Limit. Oxygen concentration is measured by the Galvanic Cell
Principle. When gas readings on the display have stabilised, pressing a panel
key stores the readings in memory, together with an identification code and
the current time and date. It is possible to select pre-entered identity
codes thus making the data storing process more rapid. The unit also provides
the option to store gas temperature and leachate level. Temperature can be
recorded automatically by a probe connected to the communications port or
entered manually with data from a separate thermometer. Leachate level is
measured with a clipmeter (water level indicator).
A data logging facility allows an unattended unit to automatically obtain
readings. In addition, the unit has the ability to measure atmospheric
pressure, to make automatic corrections to measured gas concentrations and to
measure the relative vacuum in gas extraction pipelines. Additional gases can
be measured by using one of nine plug-in Gas Pods. The additional gas reading
automatically appears on the Gas Analyser screen. Please note that Gas Pods
are NOT certified as intrinsically safe. Further details available on
request.
BENEFITS
-Certified for use
in hazardous locations to Safety Classification EEx ibe 1113 T3.
-Two models
available: 0 - 5% or 0 - 100% CH4 reading range.
-Measures
concentrations of gases CH4, C02 and 02.
-Measures gas or
ambient air temperature with optional probe.
-Additional gases
measured using plug-in Gas Pods - H2S, CO, S02, N02, C12, H2 and HCN.
-Leachate level can
be recorded.
-Measures vacuum in
gas extraction systems.
-Measures and
automatically corrects for changes in atmospheric pressure.
-Auto recording of
time & date with each stored reading.
-CH4 reading can be shown as % gas or % LEL.
-Data Logging
facility incorporated.
-Powerful integral
pump.
-User calibration
facility incorporated.
-Memory for up to
800 readings scanned on site.
-Data can be downloaded to PC.
-------------------------------
pHep4 & pHep5
pH / °C / °F Pocket Testers
The
Hanna Instruments pHep4 & 5 pocket testers are an inexpensive alternative
to water quality meters. These tough testers for pH, are designed for easy
use and accurate measurements. Use it to make quick water quality checks in
almost any application.
These
"top of the range" testers brings even more benefits to the user.
The auto switch-off feature prolongs the life of the batteries, delivering up
to 350 hours of use. Battery life is also displayed as a percentage. The
display indicates when a stable pH value has been reached, ensuring that only
accurate readings are taken. Calibration is either 1 or 2 points with 2 sets
of memorised buffers. Calibration is automatic and can be performed easily,
even by non-technical operators. The display prompts the user to submerge the
tester into pH 7 buffer. After 20 seconds the display prompts immersion in
the second buffer (4 or 10 pH). When that is completed, the meter is
automatically calibrated and returns to operating mode.
The
pHep4 & pHep5 also feature:
Replaceable
pH electrode cartridge
Celcius
or Fahrenheit temperature selection
Auto
shut-off after 8 minutes
Hold
feature allows the user to temporarily hold the LCD display, so you can view
a single reading
100% buoyancy, it floats!
FEATURES:
-Waterproof, 100% buoyancy
-350 hours of battery life
-Easy to read dual-level LCD
-Automatic Temperature Compensation ( ATC )
-Stability indicator shows when reading is
stable
-Battery level indicator
-------------------------
